Description
Prop adapters are required to mount a propeller either on an electric motor or gearbox shaft. The shafts are usually smooth, and there are two types of adpater: those attached with a grub screw, and those that use a collet type action to grab tightly onto the smooth shaft.
The collet type are featured here – both the standard short type, and the long versions. There are also huge prop adapters for motors with 8mm and 10mm shafts – see these on a separate listing.
Following are the sizes of the collet type – the motor shaft size is specified, and the outside diameter of the shaft of the prop adapter as well.
|
Collet type prop adapters (short):
|
|||||
|
These short adaptors have a 25-26mm long shaft, with 16-18mm of effective shaft protruding from the backplate.
|
|||||
| Part No. 7124/32 |
Fits Motor Shaft 2.3mm |
Adapter shaft 6.0mm |
Collet length 25mm |
Free shaft 16mm |
Price $11.50 |
| 7124/34 | 3.0mm | 6.0mm | 25mm | 16mm | $11.50 |
| 7124/23 | 3.0mm | 8,0mm | $11.50 | ||
| 7124/33 | 3.2mm | 6.0mm | $11.50 | ||
| 7124/37 | 3.2mm | 8.0mm | 28mm | 16mm | $11.50 |
| 7124/04 | 4.0mm | 8.0mm | 25mm | 17mm | $11.50 |
| 7124/17 | 5.0mm | 8.0mm | 26mm | 18mm | $11.50 |
| 7124/05 | 6.0mm | 8.0mm | 26mm | 18mm | $11.50 |
| Collet type adapters (long): | |||||
|
Have you ever had trouble fitting your propeller and spinner on to a prop adpapter? Just not long enough? Hardly enough thread to screw on the prop nut? Aero-naut have responded. New, long prop adapters do the job – all these are 35mm long (26mm effective shaft protruding from the backplate)
|
|||||
| 7124/54 | 4mm | 8mm | 35mm | 26mm | $11.50 |
| 7124/55 | 5mm | 8mm | 35mm | 26mm | $11,50 |
| 7124/56 | 6mm | 8mm | 35mm | 26mm | $11.50 |
