Description
Use this card to program the settings in your Hifei speed controller – works with all speed controllers of that brand.
The programming is the EASIEST I have ever used – set the Dill switches, plug in the ESC, connect to a motor and a battery and press a button – hey presto, it is done. You can also program with the Tx using beeps in the traditional manner if you wish.
Programming options (default in bold):
1. Hard or soft cut-off
2. Governor mode – auto, low or high
3. Brake type – none, soft or hard
4. Low voltage cut-off: Auto LiPo detect, or manual 2-12 LiPo and some voltage selections
5. Switching rate – 8KHz, 12 KHz or 16 KHz
6. Start-up type: Very soft, soft or fast
7. Timing advance: auto setting, high, middle or low
8. Current limiting: Sensitive, standard, insensitive or disabled
You can see that, if you do not want to activate the brake, you can just accept the default settings and automatic detection features and go and fly!
